Walk-On Clean Room Light Fittings

MSS Clean Technology Ltd

Category: Cleanrooms | 19/05/2009 - 10:25:33

'Walk on' Light Fitting - Flush mounted rear access IP rating 65 Room-side and Top side.

Walk on capability to BS6399 single point load 0.9kN.

Walk-On Light Fitting

The flush mount walk-on Light Fitting is designed to flush fit (top & bottom) into the MSS composite load bearing ceiling panels, 50mm thick and upward. The unique integrated central strengthening member gives the luminaire full walk on capability and provides a separate gear compartment, which also acts as a safety rail to prevent accidental fall through when the lid is removed for maintenance.

The body of the luminaire is of split frame design with no visible screws on the underside manufactured from heavy gauge steel of welded construction. Finish powder coated RAL colour of choice.

Clean Room Luminaires

Although these clean room luminaires are of shallow depth the internal temperature does not exceed 40°C using T5 HE lamps.

Clean Room LuminaireClean Room Luminaire

Construction

Body: Heavy gauge Zintec steel 2-part sandwich construction powder coated RAL colour of choice.
Gear Tray: Heavy gauge centre safety channel support and gear housing.
Frame: Fabricated steel painted RAL colour of choice.
Control Gear: Standard T5 high frequency with dimming options.

Diffuser Options

PC: Clear Prismatic Polycarbonate (Prisms up)
PTPA: Clear Prismatic PETG TPa rated.
TG-P: Composite 4mm thick toughened glass with Clear Prismatic panel (Prisms down)

Light Distribution

Luminaire Options

Front Access Only
Dual Access

Optional Extras

Self contained 3-hour emergency packs including self-test and addressable systems.

DescriptionNominal SizeAperture Size
42T4/28W T5(1200mm x 600mm)1265mm x 555mm
32T4/21 T5(1000mm x 600mm)965mm x 555mm
22T4/14W T5(600mm x 600mm)665mm x 555mm


Walk On Lighting